Grey Diskio Pi
search
  • Grey Diskio Pi
  • Diskio Pi color black, desktop position
  • Desktop or tablet position
  • Diskio Pi without touchscreen (white)
  • Diskio Pi in tablet position, colour grey

Diskio Pi v1.2

€239.50

Diskio Pi Terminal (13'3)

Raspberry Pi compatible (1, 2, 3 B/B+, 4), Odroid C1+, C2, UP board.

The basic kit contains all the parts you need to build your mains powered terminal.

The SBC board (i.e Raspberry Pi) is not included in the kit.

Case available in black, grey, white, 3D printed. The stand is included.
Touch screen
Batteries
Fan with sensor
Color
Assembly & Tests (only with case)
Quantity
In Stock

questions  2 question about the product
 

 

Diskio Pi, the screen (in kit form) for all your medium/large format display projects !

The pre-assembled version is highly recommended for a quick start.

For the colour and/or SBC version, click here

  • Compatible with nano PC boards with up to 8 GB RAM (ARM, x86, x64)
  • Can be used as an external screen, touch via USB
  • Up to 13 hours of battery life with the battery option
  • Fully hackable, scalable, and customizable device

logo open source hardware



A scalable screen :

  • Switch from the non-touch version to the touch version by adding the glass over the screen (a new frame will be provided)
  • Add a fan and temperature sensor
  • Replace batteries if they are worn out, or add them to obtain a mobile device
  • Add your own cards, sensors, according to your needs
  • Add specially designed boards by 3DCRAN (coming soon)
  • Etc.



In the box :

  • Display and eDP flat cable x 1
  • Video controller board with OSD board and cable x 1
  • Touch screen with USB controller card x 1 (optional)
  • PETG x 1 enclosure (optional)
  • Multi-SBC plate and nylon spacers x 1
  • Daughter board x 1
  • Ethernet board x 1
  • 12000 mAh battery with charger board and cables (optional)
  • Internal cables compatible with Raspberry Pi (1, 2, 3 B/B+ 4), Odroid C1+, C2.
  • Internal flat cable and connectors for HDMI x 1
  • AC/DC power adapter with EU, UK or US cable x 1
  • Screw set and a small screwdriver x 1
  • Installation instructions x 1


Dimensions & nomenclature :

Device specifications

 
  • Screen
Brand : Innolux 
Size : 13.3 inchs
Resolution : 1920*1080 px
Surface treatment : Glossy
Type : TFT[IPS]
Luminosity : 300 cd/m2 (Typ.)
Visualisation angle : 85/85/85/85/85/85
Contrast Ratio : 800:1
Signal interface : eDP 30 pins
Lamp Type : WLED

Depending on the availability, the brand of the screen may vary. But it will always be Diskio Pi 13'3 compatible.
  • Touch glass (optional)
Structure : G/G (glass/glass)
Technology : capacitive, 10 points
Interface : USB 2.0
Hardness : ≥6H
 
  • Daughter board
Genesys Logic USB 2.0 Hub x3 (external 2x + internal 1x)
Buck convertor 9V to 5V@4A (Power circuit)
Temperature regulator (with fan/sensor in option)
Connections with SBCs by cable : (USB, Ethernet, power, HDMI).
USB 2.0 output to use touch glass with an SBC or external computer
External HDMI Input
 
  • Ethernet board
Simple expansion card, unshielded Ethernet connector without LED
3.5 mm stereo audio jack connector (coming soon)
 
  • Display controller board
HDMI 1.4 convertor to eDP
Stereo DAC via HDMI, class D stereo amplifier (1W)
Speakers : 2 x 2W

 
  • Power adapter

  •  AC/DC (9V-3A) with EU, UK ou US plug

     
  • External inputs/outputs
2x USB 2.0 output (500 mA)
1x 9V plug
1x HDMI in
1x USB 2.0 in
1x USB 2.0 (4A) power output

  • Batteries (optional)
Battery charge / decharge / balancing circuit (2S3P), with :
6 LiPo cells (7.4V,  total 12000mAh)
 
  • Size of the device
Width : 335 mm
Height : 240 mm
Max. thickness : 35 mm
Min. thickness : 12 mm
 
  • Weight of the device
Without battery : 1275 g
With 6 cell battery : 1650 g
 
  • Protection
IP 20
 
  • Case colour and material 
Matte PETG, black, grey or white. (3D printed)
 
  • Warranty
The warranty is 24 months for all parts, except for wearing parts (e.g. battery packs), which are guaranteed for 6 months. We only replace the defective part. In the case of the screen, if the reference no longer exists, we replace it with a close reference and new compatible bracket.
DPIBA0VE0GTA1K04

Data sheet

Height
340 mm
Width
335 mm
Depth
35 mm
Weight
1275 g
1650 g with batteries

Questions / Feedback


Send us your question

questions Philippe on 09/08/2021
Question: 

J’ai choisi la tablette montée avec R PI mod B 4 Gb. Configuration facile, mais il faut penser à mettre à jour l’OS. Le plus de la version 1.2 c’est le lecteur de carte microSD, ce n’est pas détaillé. Il n’est pas toujours facile de trouver des informations sur forum/wiki mais Guillaume réagit très vite aux questions. Seul regret, la faible autonomie de la batterie
Answer: 

Merci pour ce retour
questions Arduiblog on 09/07/2021
Question: 

Je suis très content de ma tablette. Je me suis bien amusé à la monter, elle est bien conçue et évolutive. En plus, en cas de problème Guillaume est très réactif. Si vous voulez en savoir plus, vous trouverez un test sur mon blog : https://arduiblog.com/2021/07/19/diskio-pi/
Answer: 

Merci Jean-Christophe ! :)

Question about the product

* Required fields
Send